Peerless ST660 Tilt Wall Mount for 37" to 63" Displays (Black) by Peerless
|
List Price: Our Price: $76.33 You Save: $173.67 (69%) Availability: Usually ships in 3-4 business days Category: Home Theater See more digital camera details and other models |
|---|
Digital camera reviews of Peerless ST660 Tilt Wall Mount for 37" to 63" Displays (Black)
Digital camera Review: Fine piece. Does the job
Summary: 4 Stars
There is not much to say about a TV mount. If it fits the TV, seems solid and holds the unit on the wall; you can't ask for anything else. This one does all of the above.Digital camera Review: Friendly Warning
Summary: 2 Stars
Be aware that many of the mounts on Amazon are incorrectly labled for TV size. The mounting bracket for this unit is only 30" wide. The mounting holes on the back of my 47" TV are 31" apart! Therefore this unit will not work. The best bet if you want this brand is to go with tht ST670P. It's mounting bracket is 37" wide. Though I doubt it will support the 73" TV it claims it should work for TV's in the 50" range.
Digital camera Review: Full marks
Summary: 5 Stars
The unit arrived promptly, as promised and is holding my lovely new 120 hrz/1080P 52 inch LCD screen, now at the perfect and very slightly angled position I wanted. It's a good product, with the right adjustment capabilities and most importantly--it's STRONG. Which is a peace-of-mind thing for me.Digital camera Review: Good frame, beware of instructions
Summary: 4 Stars
Good frame and hardware. Fit my Panasonic 46" plasma perfectly. However, the instructions almost led to an installation error. The instructions stated that the top mounting bolts of the frame should be measured at 6.2" above the center of the screen. Luckily, I decided to mount the brackets on the TV, then put the frame on while the TV was on the ground and measure to the top of the TV from the top of the frame. There was 2" more to the top of the TV then when following the 6.2" instructions. If I would have mounted the frame as originally measured, the screen would have been 2" too high. Please take my advice and measure out the actual distance with the frame on the brackets before you hang the frame.Digital camera Review: Good mount BUT, order the other model for 50"+ sets
Summary: 4 Stars
This mounting system is very strong, well made, and the tilt mechanism works great. The locking screws that secure the TV arm brackets to the mounting plate add an extra level of security.
However, it's a real shame the wall bracket isn't just a couple of inches wider, so it would span 3 studs (on 16" centers). I should have read reviewer G. Knight's comments about this, before ordering.
I should have checked my stud locations before ordering this mount. I discovered that the centerline of my optimal TV location on my wall, was almost directly over a stud. So, I had to shift the mount left to the farthest recommended holes. After mounting the TV on the bracket and shifting it to the right to compensate, the wall bracket flexes by an undesireable amount.
If you are going to mount a 50" or larger TV on your wall, and want a precise placement, I recommend that you avoid this model and go with the ST670 series instead.
On the other hand, if you have a wide latitude for positioning your TV on the wall, or are lucky enough so that your TV's centerline lies directly between two studs (plus or minus 2"), this mount will do the job very nicely. My advice is, determine where you want your TV then check to see if your stud locations are optimally placed, before ordering.