Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included by Tenergy (Electronics Edition) at ApexCamera.com

Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included

Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included
by Tenergy

Our Price: $25.99
Availability: Usually ships in 1-2 business days
Category: CE
See more digital camera details and other models

Digital product summary information

Manufacturer: Tenergy
Model: 91049
Product features:

Compatible with all Roomba FloorVac models.
Up to 120 minutes run-time
The battery is designed for exactly replacing inside battery pack for IRobot Vacuum cleaner. e.g Roomba APS 4905 battery.
Can be recharged up to 1000 cycles.
To replace inside battery you need to take off 4 screws on the case then put new battery with solid connection. Screwdriver is included

Write your own review

Summary of Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included

Features and Benefits * NIMH High Power 14.4V 3800mAh rechargeable battery * 70 oC thermistor installed in the battery pack. Power will be cutt off if battery temperature beyond 70oC during charging to prevent from over charge. * 6" length wires is pre-installed for easy installation. * The battery is designed for exactly replacing inside battery pack for IRobot Vacuum cleaner. e.g Roomba APS 4905 battery. - To replace inside battery you need to take off 4 screws on the case then put new battery with solid connection. - Please make sure polarity of battery pack. Red wire is always connect to positive * TECHNICAL SPECIFICATIONS: - Votlage: 14.4V made of 12 pcs High quality NiMH sub C cells. and packed by 2x6 configuration - Capacity: 3800mAh - Max. Discharging rate : 10 C at 33 A - Dimension: 136 mm L x 45 mm W x 45 mm H. - Weight: 38.5 Oz. * Battery Installation Instruction: Step 1: Loose up all srews on the top cover of the Roomba Advanced Power System. Tool: You need a triangle screw driver to do so. Step 2: Open and remove the top cover from the power system which may be glued. Tool: You may need a flat screw driver to open it carfuelly Step 3: Remove the old battery inside. Three are wires with metal contact connected inside. You can remove the wires by pulling up the contat or cut wires off. Take a note of the wire connections Step 4: Put new battery into the battery case and solder three wire back to metal contacts. Follow the note taken in Step 3 or the following details for re-wire: - Red wire : battery positive - The red wire must go to the terminal farthest away from the battery - Black wire: battery negative - metal contact near edge - White wire: temp sensore - metal contact on other side Step 5: Put back the cover Step 6: Screws on the cover

Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included